These unique palm key risers are CNC machined from solid plastic and 100% Made in the USA. The T-slot shaped cutout slides over the palm key and plastic tipped set screws lock them in place. Allen wrench (5/64") included with all orders.
Choose from 3 sizes (see chart below for sizing). Use the drop down menu to select a set of three
Or make you own set by sequentially adding individual ones to your cart here: Individual Palm Key Risers
These risers will fit most saxophones. Palm key should be no wider than 1/2"
Features:
- Low mass
- Secured with plastic tipped set screws that will not mar the saxophone
- 3 sizes to choose from. Mix and match as needed.
- Made from solid Delrin/Acetal plastic: very strong, considered the workhorse of plastics.
- Plastic tipped steel set screws
- Removable unlike sculpted cork method
- Ergonomic curvature.
- Textured or Smooth options
- Made in the USA
Size medium shown on a tenor sax. Smooth on left, textured on right.
The palm key should be able to fit in the T-slot opening shown here:
The set screws we use in the palm key risers are now arriving with a prop 65 warning on them. Please be advised. Worth noting, the set screws do not make skin contact when installed. It’s not clear if the steel used is actually alloyed with lead or if they are putting this label on everything they sell as a blanket. For example they also make stainless steel versions which carry the same label, but I’m not aware that stainless is every alloyed with lead. Thanks for your understanding.
This product was added to our catalog on Friday 10 March, 2017.
